Driver Software For Arduino Uno | Arduino Ide 1 Installation (Windows)

by Shubkids
15 February, 2024

Arduino UNO and Mega Windows 7, 8, 10 USB driver Solved

Arduino Uno Drivers Download

Driver Version: 1.0.0.0
Release Date: 2013-01-04
File Size: 2.14M
Supported OS: Windows 10 64 bit, Windows 8.1 64bit, Windows 7 64bit, Windows Vista 64bit, Windows XP 64bit

Please enter verification code, then click the download button.

Driver Version: 1.0.0.0
Release Date: 2013-01-01
File Size: 8.49K
Supported OS: Windows 10 32 & 64bit, Windows 8.1 32 & 64bit, Windows 7 32 & 64bit, Windows Vista 32 & 64bit, Windows XP

Please enter verification code, then click the download button.

Download Arduino and install Arduino driver

Manually Install Drivers on Windows

Learn how to install Arduino drivers manually on Windows 7, Vista & 10.

The following instructions are for Windows 7, Vista and 10. They are valid also for Windows XP, with small differences in the dialog windows. In the following instruction only the Leonardo board will be mentioned, but the same procedure is valid for all the Arduino boards.

Plug in your board and wait for Windows to begin its driver installation process. If the installer does not launch automatically, navigate to the Windows Device Manager (Start>Control Panel>Hardware) and find the Arduino Leonardo listing. Right click and choose Update driver.

At the next screen, choose “Browse my computer for driver software”, and click Next.

Click the Browse… button. Another dialog appears: navigate to the folder with the Arduino software that you just downloaded. Select the drivers folder an click OK, then click Next.

You will receive a notification that the board has not passed Windows Logo testing. Click on the button Continue Anyway.

After a few moments, a window will tell you the wizard has finished installing software for Arduino Leonardo. Press the Close button.

The text of the Arduino getting started guide is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the guide are released into the public domain.

Suggested changes

The content on docs.arduino.cc is facilitated through a public GitHub repository. You can read more on how to contribute in the contribution policy.

License

The Arduino documentation is licensed under the Creative Commons Attribution-Share Alike 4.0 license.

Hướng dẫn cài đặt Driver cho Arduino Uno R3 (Mới nhất 2023)

Chào các bạn, hôm nay mình sẽ hướng dẫn các bạn cách cài đặt Driver cho Arduino IDE. Một sự cố mà các bạn hay thực hành trên các bo Arduino. Trong các sự cố mà các bạn thường hay gặp phải là không kết nối được cổng COM làm cho các bạn không thể giao tiếp được với board mạch chủ. Để có thể hiểu rõ hơn cách giao tiếp ra sao các bạn đọc ngay bài viết bên dưới để hiểu rõ hơn nhé.

Đọc ngay: Giao tiếp Arduino với máy tính thông qua Serial (UART) (Cập nhật 2023)
Đọc ngay: Mạch Arduino Uno là gì? Hướng dẫn chi tiết cách sử dụng

Tech Support & Product Discussion

Thank you for choosing our products! We are here to provide you with different support to ensure that your experience with our products is as smooth as possible. We offer several communication channels to cater to different preferences and needs.

Bước đầy tiên để làm quen với arduino là tải về IDE( phần mềm lập trình, nạp code và giao tiếm serial port với arduino) ngay sau khi cài đặt chúng ta sẽ bắt tay vào việc tìm hiểu các bài code mẫu trong IDE. Với phương châm là giúp cho bất cứ ai cũng có thể tiếp cận với arduino nên bài viết này sẽ hướng dẫn chi tiết nhất có thể.

Getting Started on Linux

For using on Linux, please go to Installing Arduino on Linux

You don’t need to install any drivers.

First of all, you need to Install an Arduino Software.

What’s the difference between Arduino UNO and Seeeduino v4.2

Seeeduino v4.2 is fully compatible with Arduino UNO. The mainly difference list below:

Use a micro USB to power and program the board
3 on-board Grove connector
3.3/5V system power switch
DCDC circuit instead of LDO, more efficiency
Others circuit improve

I can’t upload my sketch to Seeeduino v4.2

Please check,

If the Power LED on
If you choose the right Port and Board (Seeeduino v4.2)
Close and reopen Arduino IDE and try again

Where can I find technical support if I have some other issue

You can post a question to Seeed Forum .

Một số lỗi khi nạp trên Arduino

Chưa chọn đúng Board

Trong trường hợp bạn đang sử dụng Arduino Uno R3 để triển khai cho dự án của mình nhưng lại chọn sai bo arduino khi nạp.

Chọn sai cổng COM

Trong quá trình làm việc bạn có thể cắm rất nhiều thiết bị giao tiếp với máy tính nên thường xuất hiện nhiều cổng COM làm bạn bối rối và chọn sai.

Chọn sai Processor trên Board Arduino Nano

Đa phần các bạn đều sử dụng các bo mạch arduino được sản xuất tại trung nên cần chọn đúng bootloader của hãng sản xuất.

Lỗi “error compiling for board arduino/genuino uno”

Một lỗi cũng hay thường gặp trên arduino uno r3 là lỗi biên dịch chương trình. Để khắc phục vấn đề này các bạn vào phần Sketch > Include Library > Manage Libraries.

Ở phần này các bạn gõ vào thanh tìm kiếm trên phần mềm arduino “u8glib” kéo xuống phía dưới nhấn INSTALL. Như vậy là đã xong rồi nhé.

Home

» &nbspArduino Uno

Use the links on this page to download the latest version of Arduino Uno drivers. All drivers available for download have been scanned by antivirus program. Please choose the relevant version according to your computer’s operating system and click the download button.

System Information

Your machine is currently running: Windows (Detect)

Install the Driver

First of all, you need to:

Get a Micro-USB cable
- You need a Micro-USB cable first; the data cable of an Android Phone will do fine. If you can’t find one, you can buy one here.
Connect the board
- The Seeeduino V4.2 automatically draw power from either the USB connection to the computer or an external power supply. Connect the Arduino board to your computer using the USB cable. The green power LED (labelled PWR) should go on.

For Windows

This drive is available for Windows XP, Windows Vista, Windows 7, Windows 8/8.1 and Windows 10.

Plug in your board and wait for Windows to begin its driver installation process. After a few moments, the process will fail, despite best efforts.
Click on the Start Menu, and open up the Control Panel.
While in the Control Panel, navigate to System and Security. Next, click on System. Once the System window is up, open the Device Manager.
Look under Ports (COM & LPT). You should find an open port named “Seeeduino v4.2”. If there is no COM & LPT section, look under “Other Devices” for “Unknown Device”.
Right click on the “Seeeduino v4.2” port and choose the “Update Driver Software” option.
Next, choose the “Browse my computer for Driver software” option.
Finally, navigate to and select the driver file named “seeed_usb_serial.inf”
Windows will finish up the driver installation from there.

For Mac OSX

You don’t need to install any drivers.

For Linux

How To Install Arduino IDE 2.0 On Windows 10/11 [ 2023 Update ] Arduino Uno Complete Guide

Install the driver

Installing drivers for the Seeeduino with window7

Plug in your board and wait for Windows to begin its driver installation process. After a few moments, the process will fail.
Open the Device Manager by right clicking “My computer” and selecting control panel.
Look under Ports (COM & LPT). You should see an open port named “USB Serial Port” Right click on the “USB Serial Port” and choose the “Update Driver Software” option.

Next, choose the “Browse my computer for Driver software” option.

Finally, select the driver file named “FTDI USB Drivers”, located in the “Drivers” folder of the Arduino Software download.

Note: the FTDI USB Drivers are from Arduino. But when you install drivers for other Controllers, such as Xadow Main Board, Seeeduino Clio, Seeeduino Lite,
you need to download corresponding driver file and save it. And select the driver file you have downloaded.

The below dialog boxes automatically appears if you have installed driver successfully.

You can check that the drivers have been installed by opening the Windows Device Manager. Look for a “USB Serial Port” in the Ports section.

You can also see the serial port in Arduino environment.

Installing drivers for the Seeeduino with window8

You should save these files which you are editing before installing driver with window8，because there will several power off during operating.

Press “Windows Key” +”R”
Enter shutdown.exe /r /o /f /t 00
Click the “OK” button.
System will restart to a “Choose an option” screen
Select “Troubleshoot” from “Choose an option” screen
Select “Advanced options” from “Troubleshoot” screen
Select “Windows Startup Settings” from “Advanced options” screen
Click “Restart” button
System will restart to “Advanced Boot Options” screen
Select “Disable Driver Signature Enforcement”
Once the system starts, you can install the Arduino drivers as same as Windows

Installing drivers for the Seeeduino with Mac OS

Download Driver for the Mac OS X version, named 2.2.18 (32bit)

Open the driver file which you just download, and double click FTDIUSBSerialDriver_10_4_10_5_10_6_10_7.mpkg

After double click, you will see an installer window.

You can see the below dialog boxes if you have installed driver successfully.

www.seeedstudio.comwww.seeed.cc

This static html page was created from http://www.seeedstudio.com/wiki

Download Arduino and install Arduino driver

II.Cài đặt

Chọn Start Menu, click chuột phải “Computer”, và chọn “Manage”.

Chọn “Device Manager” phía bên trái, tìm dòng “Unknown device” hoặc “Arduino *Board Name*” phía dưới “Other devices”

Click chuột phải vào “Unknown device” hoặc “Arduino *Board Name*” và chọn “Update Driver Software”.

Sau đó chọn “Browse my computer for Driver software”

Cuối cùng chon Browse và tìm đến thư mục chứ file cài driver trong thư muc arduino( ví dụ trên máy của tôi là F:Program Filesarduino-1.8.2drivers)

Nếu windows hiện thông báo này hãy chọn “Install this driver software anyway”.

Như vậy là máy tính đã nhận mạch Arduino , ta có thể sử dụng mạch được rồi .

Chúc các bạn thành công!

Arduino IDE 1 Installation (Windows)

Install the Arduino Software (IDE) on Windows

This document explains how to install the Arduino Software (IDE) on Windows machines.

How to Install, Troubleshoot and Fix COM Port Drivers for Arduino Boards - FTDI and CH340 Series — How to Install, Troubleshoot and Fix COM Port Drivers for Arduino Boards – FTDI and CH340 Series

Download the Arduino Software (IDE)

Get the latest version from the download page. You can choose between the Installer (.exe) and the Zip packages. We suggest you use the first one that installs directly everything you need to use the Arduino Software (IDE), including the drivers. With the Zip package you need to install the drivers manually. The Zip file is also useful if you want to create a portable installation.

When the download finishes, proceed with the installation and please allow the driver installation process when you get a warning from the operating system.

The process will extract and install all the required files to execute properly the Arduino Software (IDE)

The text of the Arduino getting started guide is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the guide are released into the public domain.

Suggested changes

The content on docs.arduino.cc is facilitated through a public GitHub repository. You can read more on how to contribute in the contribution policy.

License

The Arduino documentation is licensed under the Creative Commons Attribution-Share Alike 4.0 license.

Arduino boards provide an USB interface. Before we plug the USB cable and link the board to our computer, we have to install specific drivers in the latter.

There is a huge difference between Windows and OS X here; basically, OS X doesn’t require any specific drivers for Arduino Uno or even Mega 2560. If you are using older boards, you’d have to download the latest version of drivers on the FTDI website, double-click the package, then follow instructions, and finally, restart your computer.

Let’s describe how it works on Windows-based systems, I mean, Windows 7, Vista, and XP.

It is important to follow the steps mentioned next to be able to use the Arduino Uno R3 and some other boards. Please check the Arduino website for up-to-date references.

Plug your board in and wait for Windows to begin the driver installation process. After a few moments, the process fails.
Click on the Start menu, and open Control Panel.
In Control Panel, navigate to System and Security. Next, click on System. Once the System window is up, open Device Manager.
Look under Ports (COM & LPT). Check the open port named Arduino UNO (COMxx).
Right-click on the Arduino UNO (COMxx) port and choose the Update Driver Software option.
Next, choose the Browse my computer for driver software option.
Finally, navigate and select the Uno’s driver file, named

ArduinoUNO.inf
, located in the
Drivers
folder of the Arduino software download (be careful: not the
FTDI USB Drivers
subdirectory).
Windows will finish the driver installation from there and everything will be fine.

When you connect the board, Windows should initiate the driver installation process (if you haven’t used the computer with an Arduino board before).

On Windows Vista, the driver should be automatically downloaded and installed. (Really, it works!)

On Windows XP, the Add New Hardware wizard will open:

When asked Can Windows connect to Windows Update to search for software? select No, not this time. Click on Next.
Select Install from a list or specified location (Advanced) and click on Next.
Make sure that Search for the best driver in these locations is checked, uncheck Search removable media, check Include this location in the search, and browse to the drivers/FTDI USB Drivers directory of the Arduino distribution. (The latest version of the drivers can be found on the FTDI website.) Click on Next.
The wizard will search for the driver and then tell you that a USB Serial Converter was found. Click on Finish.
The new hardware wizard will appear again. Go through the same steps and select the same options and location to search. This time, a USB Serial Port will be found.

You can check that the drivers have been installed by opening Windows Device Manager (in the Hardware tab of the System control panel). Look for a USB Serial Port in the Ports section; that’s the Arduino board.

Now, our computer can recognize our Arduino board. Let’s move to the physical world a bit to join together the tangible and intangible worlds.

Install the driver

Installing drivers for the Seeeduino with window7

Plug in your board and wait for Windows to begin its driver installation process. After a few moments, the process will fail.
Open the Device Manager by right clicking “My computer” and selecting control panel.
Look under Ports (COM & LPT). You should see an open port named “USB Serial Port” Right click on the “USB Serial Port” and choose the “Update Driver Software” option.

Next, choose the “Browse my computer for Driver software” option.

Finally, select the driver file named “FTDI USB Drivers”, located in the “Drivers” folder of the Arduino Software download.

Note: the FTDI USB Drivers are from Arduino. But when you install drivers for other Controllers, such as Xadow Main Board, Seeeduino Clio, Seeeduino Lite,you need to download corresponding driver file and save it. And select the driver file you have downloaded.