Supported OS: Windows 10 64 bit, Windows 8.1 64bit, Windows 7 64bit, Windows Vista 64bit, Windows XP 64bit
Please enter verification code, then click the download button.
Driver Version: 1.0.0.0
Release Date: 2013-01-01
File Size: 8.49K
Supported OS: Windows 10 32 & 64bit, Windows 8.1 32 & 64bit, Windows 7 32 & 64bit, Windows Vista 32 & 64bit, Windows XP
Please enter verification code, then click the download button.
The CH340 driver chip is a USB converter chip, which converts USB to serial UART interface or to printer interface. In UART mode, CH340 provides common MODEM interface signals, to expand UART interface of computer or upgrade common serial communication devices to USB directly. The CH340 chip is used by a number of Arduino compatible boards NodeMCU and Some USB to TLL Converters to provide USB connectivity, you may need to install a driver to be able to detect your device to your PC. But don’t worry, it’s not that complicated as it sounds.Other Alternative to CH340 are CP2102 and FTDI. But the cost for these are more making your device costly. All three, Arduino UNO SMD, NodeMCU and USB to TTL converter, nearly get your work done.
Now here is the step by step illustration to install CH340 drivers on the Windows and Linux system.
Windows
(CH340 Datasheet and Software Chinese)
Download the Windows CH340 Driver
Unzip the file
Run the installer from the folder that you unzipped.
In the Arduino IDE when the CH340 is connected you will see a COM Port in the Tools > Serial Port menu, the COM number for your device may vary depending on your system.
Linux
Drivers are almost certainly built into your Linux kernel already and it will probably just work as soon as you plug it in. If not you can download the Linux CH340 Driver (but we’d recommend just upgrading your Linux install so that you get the “built in” one).
Hướng dẫn cài đặt Driver cho Arduino Uno R3 (Mới nhất 2023)
Chào các bạn, hôm nay mình sẽ hướng dẫn các bạn cách cài đặt Driver cho Arduino IDE. Một sự cố mà các bạn hay thực hành trên các bo Arduino. Trong các sự cố mà các bạn thường hay gặp phải là không kết nối được cổng COM làm cho các bạn không thể giao tiếp được với board mạch chủ. Để có thể hiểu rõ hơn cách giao tiếp ra sao các bạn đọc ngay bài viết bên dưới để hiểu rõ hơn nhé.
Đọc ngay: Giao tiếp Arduino với máy tính thông qua Serial (UART) (Cập nhật 2023)
Đọc ngay: Mạch Arduino Uno là gì? Hướng dẫn chi tiết cách sử dụng
Arduino UNO and Mega Windows 7, 8, 10 USB driver Solved
Một số lỗi khi nạp trên Arduino
Chưa chọn đúng Board
Trong trường hợp bạn đang sử dụng Arduino Uno R3 để triển khai cho dự án của mình nhưng lại chọn sai bo arduino khi nạp.
Chọn sai cổng COM
Trong quá trình làm việc bạn có thể cắm rất nhiều thiết bị giao tiếp với máy tính nên thường xuất hiện nhiều cổng COM làm bạn bối rối và chọn sai.
Chọn sai Processor trên Board Arduino Nano
Đa phần các bạn đều sử dụng các bo mạch arduino được sản xuất tại trung nên cần chọn đúng bootloader của hãng sản xuất.
Lỗi “error compiling for board arduino/genuino uno”
Một lỗi cũng hay thường gặp trên arduino uno r3 là lỗi biên dịch chương trình. Để khắc phục vấn đề này các bạn vào phần Sketch > Include Library > Manage Libraries.
Ở phần này các bạn gõ vào thanh tìm kiếm trên phần mềm arduino “u8glib” kéo xuống phía dưới nhấn INSTALL. Như vậy là đã xong rồi nhé.
With Arduino being an open-source electronics platform, their PCB designs are freely available, which means it is possible to get a generic Arduino board for much less than the branded boards.
Like when I purchased a 4WD chassis. Which also came with an unbranded Arduino UNO SMD.
What’s the difference with Arduino UNO SMD?The Arduino UNO SMD, uses a surface mount version of the ATmega328P instead of the through hole version.
But i had a problem with this generic board, when I came to use the board, I wasn’t able to communicate with the board via the Arduino IDE.
When I opened Device manager to double-check I was connecting using the correct COM port, it became clear that there was a missing driver as it was showing as “USB Serial”.
For any missing drivers that Windows isn’t able to automatically find and install and it isn’t clear where to get the drivers from as this was an unbranded board.The first step is to find the Hardware IDs of the device by right-clicking on the device > Details and Selecting Hardware IDs. In this instance I could search for the Hardware ID and see that it was for a “CH340 Serial to USB Adapter” which had the Hardware ID “USB\VID_1A86&PID_7523”.
It turns out it is very common for the generic Arduino UNO SMD’s to require this driver. For convenience please see below for a download of the driver.
NOTE: The download is provided for convenience and is provided “AS IS” without warranty of any kind, expressed or implied.To install this driver, right-click on the missing device and select “update driver”. Then select “browse my computer for drivers” and select the folder where you have downloaded and extracted the above download.
Once installation is complete the device is ready to use.
Please get in touch if you have any comments or suggestions via email: [email protected]
Most new users find it difficult to get the USB drivers. Because Arduino Uno (SMD Edition) does not use the same driver chip with Arduino Uno R3 (DIP Edition). But don’t worry, High Technology Electronics (HTE) have provided two drivers.
Use the USB / Serial CH340 / CH341 Driver‘s Download:
Windows 32 bit : Download
Windows 64 bit : Download
Linux : Download
MAC : Download
USB Serial Driver CH 340 can be used for Windows XP / Win 7 / Wind 8. I try to use Windows 8.If USB Serial Drivers are successful it will be visible in the Devices Manager of Windows
Most new users find it difficult to get USB drivers. Because Arduino Uno Clone does not use the same driver chip with Arduino Uno R3 Original. But don’t worry, Srishti Robotics has provided two drivers.
Use the USB / Serial CH340 / CH341 Driver‘s Download:
Windows 32 bit: Download
Windows 64 bit: Download
Linux: Download
MAC: Download
USB Serial Driver CH 340 can be used for Windows XP / Win 7 / Wind 8. I try to use Windows 8. If USB Serial Drivers are successful they will be visible in the Devices Manager of Windows
Arduino clone Driver, Arduino Uno R3 Driver, CH340, CH341, USB Driver, Arduino Windos, Arduino Linux Driver, Arduino MAC Driver
Tên file
Driver CH340 New Version 32bit (Arduino Uno / Nano)
Learn how to install Arduino drivers manually on Windows 7, Vista & 10.
The following instructions are for Windows 7, Vista and 10. They are valid also for Windows XP, with small differences in the dialog windows. In the following instruction only the Leonardo board will be mentioned, but the same procedure is valid for all the Arduino boards.
Plug in your board and wait for Windows to begin its driver installation process. If the installer does not launch automatically, navigate to the Windows Device Manager (Start>Control Panel>Hardware) and find the Arduino Leonardo listing. Right click and choose Update driver.
At the next screen, choose “Browse my computer for driver software”, and click Next.
Click the Browse… button. Another dialog appears: navigate to the folder with the Arduino software that you just downloaded. Select the drivers folder an click OK, then click Next.
You will receive a notification that the board has not passed Windows Logo testing. Click on the button Continue Anyway.
After a few moments, a window will tell you the wizard has finished installing software for Arduino Leonardo. Press the Close button.
The text of the Arduino getting started guide is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the guide are released into the public domain.
Suggested changes
The content on docs.arduino.cc is facilitated through a public GitHub repository. You can read more on how to contribute in the contribution policy.
License
The Arduino documentation is licensed under the Creative Commons Attribution-Share Alike 4.0 license.
Home
»  Arduino UNO R3 (COM3)
Use the links on this page to download the latest version of Arduino UNO R3 (COM3) drivers. All drivers available for download have been scanned by antivirus program. Please choose the relevant version according to your computer’s operating system and click the download button.
System Information
Your machine is currently running: Windows (Detect)
Arduino Uno R3 Chíp dán cổng Micro USB (CH340)
Uno R3 là một sản phẩm mà ai cũng nhớ đến khi nhắc về Arduino.
Link download Driver USB: Driver_CH340
Chip điều khiển chính: ATmega328
Nguồn nuôi mạch: 5V
Nguồn ngoài( cắm từ giắc tròn DC): Khuyên dùng 7-9V để đảm bảo mạch hoạt động tốt, nếu bạn cắm 12V thì IC ổn áp rất dễ chết và gây hư hỏng mạch.
Số chân Digital: 14 (hỗ trợ 6 chân PWM)
Số chân Analog: 6
Dòng ra trên chân digital: Tối đa 40 mA
Dòng ra trên chân 5V: 500 mA
Dòng ra trên chân 3.3V: 50 mA
Dung lượng bộ nhớ Flash: 32 KB (ATmega328) of which 0.5 KB used by bootloader
SRAM: 2 KB (ATmega328)
EEPROM: 1 KB (ATmega328)
Tốc độ: 16 MHz
1x Arduino Uno R3 Chíp dán cổng Micro USB (CH340)
1. Cấp độ bảo hành: (xem thêm về cấp độ bảo hành của công ty tại đây)
2. Quy định riêng:
🔴 Công ty cổ phần điện tử SMD
📬 Địa chỉ: số 84 ngõ 132 đường Cầu Diễn – Minh Khai – Bắc Từ Liêm – HN.
![A90] Arduino Uno R3 Smd (Chip Dán)](https://chipn24.com/files/sanpham/1228/1/jpg/a90-arduino-uno-r3-smd-chip-dan.jpg "A90] Arduino UNO R3 SMD (Chip Dán)")
![Hcm]Arduino Uno R3 Smd + Tặng Kèm Cáp Usb | Lazada.Vn](https://vn-test-11.slatic.net/p/02b2f0ab63a0a3834867b96c3acb35b7.jpg "HCM]Arduino Uno R3 SMD + Tặng kèm cáp USB | Lazada.vn")
