Arduino Uno Drivers For Windows 10 | Install The Driver

» &nbspArduino Uno

System Information

Your machine is currently running: Windows (Detect)

Một số lỗi khi nạp trên Arduino

Chưa chọn đúng Board

Trong trường hợp bạn đang sử dụng Arduino Uno R3 để triển khai cho dự án của mình nhưng lại chọn sai bo arduino khi nạp.

Chọn sai cổng COM

Trong quá trình làm việc bạn có thể cắm rất nhiều thiết bị giao tiếp với máy tính nên thường xuất hiện nhiều cổng COM làm bạn bối rối và chọn sai.

Chọn sai Processor trên Board Arduino Nano

Đa phần các bạn đều sử dụng các bo mạch arduino được sản xuất tại trung nên cần chọn đúng bootloader của hãng sản xuất.

Lỗi “error compiling for board arduino/genuino uno”

Một lỗi cũng hay thường gặp trên arduino uno r3 là lỗi biên dịch chương trình. Để khắc phục vấn đề này các bạn vào phần Sketch > Include Library > Manage Libraries.

Ở phần này các bạn gõ vào thanh tìm kiếm trên phần mềm arduino “u8glib” kéo xuống phía dưới nhấn INSTALL. Như vậy là đã xong rồi nhé.

How to Install Arduino Drivers & Software on Windows 10

3 min. read

Updated on

Read the affiliate disclosure page to find out how can you help Windows Report effortlessly and without spending any money. Read more

Key notes

• Did you just buy your first Arduino board and you want to start building your very own digital device? For that, you’ll need some software to help you program your development board.
• If you have a Windows 10 computer and the means to connect your Arduino board to it, half the battle is already won. You just need to make sure that your PC can recognize the board without a fault.
• Check out our dedicated Arduino section if you want to find out more about it.
• If you’re interested in programming, our Developer Tools section can help you find interesting articles and tools.

You just bought your first Arduino board and you want to start building your very own digital device. Well, first off, you need to install the Arduino software on your Windows computer as well as the necessary drivers.

In this article, we’ll show how you can install all the tools you need in less than 10 minutes.

How can I download Arduino Nano driver on Windows 10?

In order to avoid Arduino problems on your PC, it’s important that you have the necessary drivers installed.

The lack of drivers will lead to certain issues, such as Arduino port not showing up for example, so you can see why it’s important to keep drivers up to date.

This will also lead to Arduino upload error, therefore visit the official website and download the latest drivers from there.

How to install Arduino software on Windows 10

1. Download Arduino IDE to your Windows PC.
2. Wait until the download process completes > install the software and choose the components that you want to install, as well as the install location
3. Accept driver installation when prompted by Windows 10

If you choose to select the Zip package, you should know that you need to install the board drivers manually.

How to install Arduino drivers on Windows 10

1. Go to Start > type ‘device manager’ > double click the first result to launch the Device Manager.
2. Go to Ports > locate the Arduino UNO port
3. In case you can’t find that port, go to Other Devices and locate Unknown Device
4. Select the Arduino UNO port > click on Update Driver
5. Select the option ‘Browse my computer for Driver software’ > go to the Arduino software download location > select the arduino.inf file/Arduino UNO.inf (depending on your software version)
6. Wait until Windows finishes the driver install process.

Installing drivers manually can be a hard task if you do this for the first time. Another option is to automatically install your drivers with a professional driver updater tool that can help you save time and safely install the drivers you need in seconds.

Now that you installed the Arduino software and driver on your computer, it’s time to open your first sketch. Select your board type and port and upload a program to make sure that your board is up and running.

That’s pretty much it, follow the steps listed above and you should be able to get your Arduino board started in just a few minutes.

Should you encounter any issues while using your board, Windows Report compiled a list of the most common issues affecting Arduino and their corresponding fixes.

The best way to fix your PC to run at peak performance is to update your drivers. If your system is slow, unresponsive or crashes often, the problem may be with your drivers. Sometimes, after upgrading to a newer operating system such as Windows 11, problems can occur because your current driver may only work with an older version of Windows. To download and update your drivers, follow the instructions below.

Tech Tip: Updating drivers manually requires some computer skills and patience. A faster and easier option is to use the Driver Update Utility for Arduino to scan your system for free. The utility tells you which specific drivers are out-of-date for all of your devices.

To get the latest driver, including Windows 11 drivers, you can choose from the above list of most popular Arduino downloads. Click the “Download driver” button next to the matching model name. After you complete your download, move on to Step 2.

If your driver is not listed and you know the model name or number of your Arduino device, you can use it to search our driver archive for your Arduino device model. Simply type the model name and/or number into the search box and click the Search button. You may see different versions in the results. Choose the best match for your PC and operating system.

If you don’t know the model name or number, you can start to narrow your search down by choosing which category of Arduino device you have (such as Printer, Scanner, Video, Network, etc.). Start by selecting the correct category from our list of Arduino Device Drivers by Category above.

We employ a team from around the world. They add hundreds of new drivers to our site every day.

Tech Tip: If you are having trouble deciding which is the right driver, try the Driver Update Utility for Arduino. It is a software utility that will find the right driver for you – automatically.

Once you download your new driver, then you need to install it. To install a driver in Windows, you will need to use a built-in utility called Device Manager. It allows you to see all of the devices recognized by your system, and the drivers associated with them.

In Windows 11, Windows 10 & Windows 8.1, right-click the Start menu and select Device Manager

In Windows 8, swipe up from the bottom, or right-click anywhere on the desktop and choose “All Apps” -> swipe or scroll right and choose “Control Panel” (under Windows System section) -> Hardware and Sound -> Device Manager

In Windows 7, click Start -> Control Panel -> Hardware and Sound -> Device Manager

In Windows Vista, click Start -> Control Panel -> System and Maintenance -> Device Manager

In Windows XP, click Start -> Control Panel -> Performance and Maintenance -> System -> Hardware tab -> Device Manager button

Locate the device and model that is having the issue and double-click on it to open the Properties dialog box.

Select the Driver tab.

Click the Update Driver button and follow the instructions.

In most cases, you will need to reboot your computer in order for the driver update to take effect.

Tech Tip: Driver downloads and updates come in a variety of file formats with different file extensions. For example, you may have downloaded an EXE, INF, ZIP, or SYS file. Each file type has a slighty different installation procedure to follow.

If you are having trouble installing your driver, you should use the Driver Update Utility for Arduino. It is a software utility that automatically finds, downloads and installs the right driver for your system. You can even backup your drivers before making any changes, and revert back in case there were any problems. You can safely update all of your drivers in just a few clicks. Once you download and run the utility, it will scan for out-of-date or missing drivers:

When the scan is complete, the driver update utility will display a results page showing which drivers are missing or out-of-date. You can update individual drivers, or all of the necessary drivers with one click.

For more help, visit our Driver Support Page for step-by-step videos on how to install drivers for every file type.

Okay, so I got a genuine Arduino UNO R3 here. Running windows 10. It is updated. I also have the 1.8.13 version of the Arduino IDE. All is working well, I then have an issue uploading a sketch to the board and go to the ports tab and see that it is greyed out. I look up a solution on these forums that is a few years old that says to uninstall, unplug, replug, then reinstall and that should fix it. I go to device manager to uninstall, unplug, replug, and the computer doesn’t reinstall automatically as the post said it would, and I can’t figure out how to reinstall the driver. Whereas before it would say “Arduino Uno” under either the “other devices” or “ports” section on device manager, I only ever get “unknown USB device” under the “universal serial bus controllers” section

When plugged into the computer it makes the connection noise. The error it gives is “USB Device not recognized”. When I go to device manager the associated port says “unknown USB device”. I right-click on it and select update driver. I go to “Browse my computer for drivers”. I locate the driver folder at C:\Program Files (x86)\Arduino\drivers and select next. Windows says “the best drivers for your device are already installed”* and still lists the device as an unknown USB device. I go back and choose “let me pick from a list of available drivers on my computer”. I click on “have disk” and again navigate to C:\Program Files (x86)\Arduino\drivers and click next. I get the error “the folder you specified doesn’t contain a compatible software driver for your device. if the folder contains a driver make sure it is designed to work with Windows for x64 based systems.” I search the web and find that disabling the driver signature requirement sometimes helps, so I hold shift while the computer is restarting, get to the blue screen with the troubleshooting options, restart and press 7 to select “disable driver signature enforcement”. Go through the same process as described above and still get the errors as described before.

I even uninstalled and reinstalled the IDE. Bupkiss.

I have been at this for 5 hours now, I am losing my mind. I don’t know if this is relevant but I have two knockoff Arduino Uno boards that literally will work only every other day. So if I plug in board A and use it, it won’t work the next day, but board B will and I have to use that one instead, then the next day B won’t work and I have to use A again, and so on and so forth. Hence receiving the genuine Uno board for x-mas hoping to eliminate this issue, under the impression it was just an issue with the knock-offs. To be fair it was working for a few hours until I followed the advice to uninstall from the device manager.

(*what the heck does this mean? how does windows know the best driver is installed if the USB device isn’t recognized?)

Hello Gozeraye, I just wrote a huge post about this and it got deleted. This problem is not you. There is something wrong with this update. I regret installing 1.8.13. I lost my entire sketch book, I’m devastated. The IDE freezes Everytime it detects the smallest error in sketchs. It run odd all together, it has trouble loading libraries, the list of issue will take up probably 5 pages here, so I’m not going to list them all again. But I have not changed anything in my setup. No uninstalls, same Arduinos I’ve been using for over 2 years with no problems. Absolutely nothing has been changed except installing the new update. Something is wrong with the program. I hope we get a response from this, because I lost a year’s worth of work.

al514: Please do not muddy the water here – you are reporting a completely different issue than the OP (and your problems are also unique to you or your system… you have confirmed that the Arduino folder within your documents folder no longer contains your sketches?).

Why am I having so many issues after updating then? And if we’re supposed to do all this deactivating of system tools, why is that not in the instructions for installing? I’m trying not to over react but it’s extremely frustrating. I apologise for that, believe me, get aggravated like this isn’t part of my personality. what should I try? The IDE just freezes and beeps at me if I push anything

I disconnected what I had connected to it (a 4 row lcd with backack and a DS3231 clock module) and reinsierted the cable. The system recognized it as an arduino uno r3 and it shows in the device manager. Huzzah. I will remember this trick in the future. Do you know why that changes how the computer sees the board?

Huzzah aside, i am getting the error I got before which led me to delete the board from the device manager in the first place. I turned on verbose compile and upload messages and have the following error:

Using Port : COM3
Using Programmer : arduino
Overriding Baud Rate : 115200
avrdude: ser_open(): can’t open device “\\.\COM3”: Access is denied.
avrdude done. Thank you.
Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.

And here is my board. My lens flare is bad but I hope it’s clear enough:

I think I will reinstall the previous version, I also read that the update had a new breakout window for working with the code? Where is that? Very confused here. I mean I love all this and the idea, but it takes a long time to learn how to use these boards. Everything was so good before.

Huzzah aside, i am getting the error I got before which led me to delete the board from the device manager in the first place. I turned on verbose compile and upload messages and have the following error:

Have you checked for failed or greyed-out device installations using COM3 in device manager? Turn on “show hidden devices” Then delete (uninstall) any greyed out COM3 device(s).