Arduino Port Driver For Windows 10

Install the Driver

First of all, you need to:

Get a Micro-USB cable
- You need a Micro-USB cable first; the data cable of an Android Phone will do fine. If you can’t find one, you can buy one here.
Connect the board
- The Seeeduino V4.2 automatically draw power from either the USB connection to the computer or an external power supply. Connect the Arduino board to your computer using the USB cable. The green power LED (labelled PWR) should go on.

For Windows

This drive is available for Windows XP, Windows Vista, Windows 7, Windows 8/8.1 and Windows 10.

Plug in your board and wait for Windows to begin its driver installation process. After a few moments, the process will fail, despite best efforts.
Click on the Start Menu, and open up the Control Panel.
While in the Control Panel, navigate to System and Security. Next, click on System. Once the System window is up, open the Device Manager.
Look under Ports (COM & LPT). You should find an open port named “Seeeduino v4.2”. If there is no COM & LPT section, look under “Other Devices” for “Unknown Device”.
Right click on the “Seeeduino v4.2” port and choose the “Update Driver Software” option.
Next, choose the “Browse my computer for Driver software” option.
Finally, navigate to and select the driver file named “seeed_usb_serial.inf”
Windows will finish up the driver installation from there.

For Mac OSX

You don’t need to install any drivers.

For Linux

Install the driver

Installing drivers for the Seeeduino with window7

Plug in your board and wait for Windows to begin its driver installation process. After a few moments, the process will fail.
Open the Device Manager by right clicking “My computer” and selecting control panel.
Look under Ports (COM & LPT). You should see an open port named “USB Serial Port” Right click on the “USB Serial Port” and choose the “Update Driver Software” option.

Next, choose the “Browse my computer for Driver software” option.

Finally, select the driver file named “FTDI USB Drivers”, located in the “Drivers” folder of the Arduino Software download.

Note: the FTDI USB Drivers are from Arduino. But when you install drivers for other Controllers, such as Xadow Main Board, Seeeduino Clio, Seeeduino Lite,you need to download corresponding driver file and save it. And select the driver file you have downloaded.

The below dialog boxes automatically appears if you have installed driver successfully.

You can check that the drivers have been installed by opening the Windows Device Manager. Look for a “USB Serial Port” in the Ports section.

You can also see the serial port in Arduino environment.

Installing drivers for the Seeeduino with window8

You should save these files which you are editing before installing driver with window8，because there will several power off during operating.

Press “Windows Key” +”R”
Enter shutdown.exe /r /o /f /t 00
Click the “OK” button.
System will restart to a “Choose an option” screen
Select “Troubleshoot” from “Choose an option” screen
Select “Advanced options” from “Troubleshoot” screen
Select “Windows Startup Settings” from “Advanced options” screen
Click “Restart” button
System will restart to “Advanced Boot Options” screen
Select “Disable Driver Signature Enforcement”
Once the system starts, you can install the Arduino drivers as same as Windows

Installing drivers for the Seeeduino with Mac OS

Enter page: https://www.ftdichip.com.
Download Driver for the Mac OS X version, named 2.2.18 (32bit)

Open the driver file which you just download, and double click FTDIUSBSerialDriver_10_4_10_5_10_6_10_7.mpkg

After double click, you will see an installer window.

Click “Continue”.

You can see the below dialog boxes if you have installed driver successfully.

Test it with Seeeduino

add

Manually Install Drivers on Windows

Learn how to install Arduino drivers manually on Windows 7, Vista & 10.

The following instructions are for Windows 7, Vista and 10. They are valid also for Windows XP, with small differences in the dialog windows. In the following instruction only the Leonardo board will be mentioned, but the same procedure is valid for all the Arduino boards.

Plug in your board and wait for Windows to begin its driver installation process. If the installer does not launch automatically, navigate to the Windows Device Manager (Start>Control Panel>Hardware) and find the Arduino Leonardo listing. Right click and choose Update driver.

At the next screen, choose “Browse my computer for driver software”, and click Next.

Click the Browse… button. Another dialog appears: navigate to the folder with the Arduino software that you just downloaded. Select the drivers folder an click OK, then click Next.

You will receive a notification that the board has not passed Windows Logo testing. Click on the button Continue Anyway.

After a few moments, a window will tell you the wizard has finished installing software for Arduino Leonardo. Press the Close button.

The text of the Arduino getting started guide is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the guide are released into the public domain.

Suggested changes

The content on docs.arduino.cc is facilitated through a public GitHub repository. You can read more on how to contribute in the contribution policy.

License

The Arduino documentation is licensed under the Creative Commons Attribution-Share Alike 4.0 license.

Download Arduino and install Arduino driver

Getting Started on Linux

For using on Linux, please go to Installing Arduino on Linux

You don’t need to install any drivers.

First of all, you need to Install an Arduino Software.

What’s the difference between Arduino UNO and Seeeduino v4.2

Seeeduino v4.2 is fully compatible with Arduino UNO. The mainly difference list below:

Use a micro USB to power and program the board
3 on-board Grove connector
3.3/5V system power switch
DCDC circuit instead of LDO, more efficiency
Others circuit improve

I can’t upload my sketch to Seeeduino v4.2

Please check,

If the Power LED on
If you choose the right Port and Board (Seeeduino v4.2)
Close and reopen Arduino IDE and try again

Where can I find technical support if I have some other issue

You can post a question to Seeed Forum .

Arduino port problem | COM port not found [ 2022 Update ] Complete Step by Step Guide

Install the driver

Installing drivers for the Seeeduino with window7

Plug in your board and wait for Windows to begin its driver installation process. After a few moments, the process will fail.
Open the Device Manager by right clicking “My computer” and selecting control panel.
Look under Ports (COM & LPT). You should see an open port named “USB Serial Port” Right click on the “USB Serial Port” and choose the “Update Driver Software” option.

Next, choose the “Browse my computer for Driver software” option.

Finally, select the driver file named “FTDI USB Drivers”, located in the “Drivers” folder of the Arduino Software download.

Note: the FTDI USB Drivers are from Arduino. But when you install drivers for other Controllers, such as Xadow Main Board, Seeeduino Clio, Seeeduino Lite,
you need to download corresponding driver file and save it. And select the driver file you have downloaded.

The below dialog boxes automatically appears if you have installed driver successfully.

You can check that the drivers have been installed by opening the Windows Device Manager. Look for a “USB Serial Port” in the Ports section.

You can also see the serial port in Arduino environment.

Installing drivers for the Seeeduino with window8

You should save these files which you are editing before installing driver with window8，because there will several power off during operating.

Press “Windows Key” +”R”
Enter shutdown.exe /r /o /f /t 00
Click the “OK” button.
System will restart to a “Choose an option” screen
Select “Troubleshoot” from “Choose an option” screen
Select “Advanced options” from “Troubleshoot” screen
Select “Windows Startup Settings” from “Advanced options” screen
Click “Restart” button
System will restart to “Advanced Boot Options” screen
Select “Disable Driver Signature Enforcement”
Once the system starts, you can install the Arduino drivers as same as Windows

Installing drivers for the Seeeduino with Mac OS

Download Driver for the Mac OS X version, named 2.2.18 (32bit)

Open the driver file which you just download, and double click FTDIUSBSerialDriver_10_4_10_5_10_6_10_7.mpkg

After double click, you will see an installer window.

You can see the below dialog boxes if you have installed driver successfully.

www.seeedstudio.comwww.seeed.cc

This static html page was created from http://www.seeedstudio.com/wiki

How to Install Arduino Drivers & Software on Windows 10

3 min. read

Updated on

Read the affiliate disclosure page to find out how can you help Windows Report effortlessly and without spending any money. Read more

Key notes

Did you just buy your first Arduino board and you want to start building your very own digital device? For that, you’ll need some software to help you program your development board.
If you have a Windows 10 computer and the means to connect your Arduino board to it, half the battle is already won. You just need to make sure that your PC can recognize the board without a fault.
Check out our dedicated Arduino section if you want to find out more about it.
If you’re interested in programming, our Developer Tools section can help you find interesting articles and tools.

You just bought your first Arduino board and you want to start building your very own digital device. Well, first off, you need to install the Arduino software on your Windows computer as well as the necessary drivers.

In this article, we’ll show how you can install all the tools you need in less than 10 minutes.

How can I download Arduino Nano driver on Windows 10?

In order to avoid Arduino problems on your PC, it’s important that you have the necessary drivers installed.

The lack of drivers will lead to certain issues, such as Arduino port not showing up for example, so you can see why it’s important to keep drivers up to date.

This will also lead to Arduino upload error, therefore visit the official website and download the latest drivers from there.

How to install Arduino software on Windows 10

Download Arduino IDE to your Windows PC.
Wait until the download process completes > install the software and choose the components that you want to install, as well as the install location
Accept driver installation when prompted by Windows 10

If you choose to select the Zip package, you should know that you need to install the board drivers manually.

How to install Arduino drivers on Windows 10

Go to Start > type ‘device manager’ > double click the first result to launch the Device Manager.
Go to Ports > locate the Arduino UNO port
In case you can’t find that port, go to Other Devices and locate Unknown Device
Select the Arduino UNO port > click on Update Driver
Select the option ‘Browse my computer for Driver software’ > go to the Arduino software download location > select the arduino.inf file/Arduino UNO.inf (depending on your software version)
Wait until Windows finishes the driver install process.

Installing drivers manually can be a hard task if you do this for the first time. Another option is to automatically install your drivers with a professional driver updater tool that can help you save time and safely install the drivers you need in seconds.

Now that you installed the Arduino software and driver on your computer, it’s time to open your first sketch. Select your board type and port and upload a program to make sure that your board is up and running.

That’s pretty much it, follow the steps listed above and you should be able to get your Arduino board started in just a few minutes.

Should you encounter any issues while using your board, Windows Report compiled a list of the most common issues affecting Arduino and their corresponding fixes.

Download Arduino and install Arduino driver

Arduino Uno Drivers Download

Driver Version: 1.0.0.0
Release Date: 2013-01-04
File Size: 2.14M
Supported OS: Windows 10 64 bit, Windows 8.1 64bit, Windows 7 64bit, Windows Vista 64bit, Windows XP 64bit

Please enter verification code, then click the download button.

Driver Version: 1.0.0.0
Release Date: 2013-01-01
File Size: 8.49K
Supported OS: Windows 10 32 & 64bit, Windows 8.1 32 & 64bit, Windows 7 32 & 64bit, Windows Vista 32 & 64bit, Windows XP

Please enter verification code, then click the download button.

Network Testing and Emulation Solutions

LANforge CT70x attenuators require recently signed Arduino drivers. The automatic driver install process for Windows 10 might automatically install a Microsoft Windows version of the Arduino Mega driver. This is not the driver LANforge expects. These instructions will guide you how through uninstalling an old driver and installing the new driver from the Arduino website.

If you have recently removed a driver, you might need to reboot your Windows system for it to complete the driver installation process.

For more information see Installing LANforge Server on Windows

I encountered issue with serial port when installing Arduino on my Windows 10 TV box. After successful installing Arduino IDE and plugging Nano I’m unable to connect to board. For some reason I’m unable to install driver for the USB port. I tried adding it manually by pointing to driver folder as the instruction showing but no success. Nano has been tested and working on other PC. Is this a case of no driver support for this platform?
Any tips how to make serial working. I need for my Ambibox setup.
I don’t have problem with other USB devices which being recognized without any issue (keyboard, mouse, USB network card).

Hello, Welcome to the Arduino Forum. This guide explains how to get the best out of this forum. Please read and follow the instructions below. Being new here you might think this is having rules for the sake of rules, but that is not the case. If you don’t follow the guidelines all that happens is there is a long exchange of posts while we try to get you to tell us what we need in order to help you, which is frustrating for you and frustrating for us. The people who try to help with your project.

It will help you get the very best out of the forum in the future.

Mention if you are using AI generated code it is important information.

Your OS and version can be valuable information, please include it along with extra security you are using. Antivirus etc.

Always list the version of the IDE you are using and the board version if applicable.

Use quote or CODE tags to add error messages as an attachment NOT a picture.

i know how to help you i have to dowload the ch340 drive in this link CH340 Drivers for Windows, Mac and Linux it worket to me after you instaled you have just to select in the ambibox app the usb serial it worked to me

How To Install Arduino IDE 2.0 On Windows 10/11 [ 2023 Update ] Arduino Uno Complete Guide

Tech Support & Product Discussion

Thank you for choosing our products! We are here to provide you with different support to ensure that your experience with our products is as smooth as possible. We offer several communication channels to cater to different preferences and needs.