Getting Started on Linux
For using on Linux, please go to Installing Arduino on Linux
You don’t need to install any drivers.
First of all, you need to Install an Arduino Software.
What’s the difference between Arduino UNO and Seeeduino v4.2
Seeeduino v4.2 is fully compatible with Arduino UNO. The mainly difference list below:
- Use a micro USB to power and program the board
- 3 on-board Grove connector
- 3.3/5V system power switch
- DCDC circuit instead of LDO, more efficiency
- Others circuit improve
I can’t upload my sketch to Seeeduino v4.2
Please check,
- If the Power LED on
- If you choose the right Port and Board (Seeeduino v4.2)
- Close and reopen Arduino IDE and try again
Where can I find technical support if I have some other issue
You can post a question to Seeed Forum .
Download the Arduino Software (IDE)
Get the latest version from the download page. You can choose between the Installer (.exe) and the Zip packages. We suggest you use the first one that installs directly everything you need to use the Arduino Software (IDE), including the drivers. With the Zip package you need to install the drivers manually. The Zip file is also useful if you want to create a portable installation.
When the download finishes, proceed with the installation and please allow the driver installation process when you get a warning from the operating system.
The process will extract and install all the required files to execute properly the Arduino Software (IDE)
The text of the Arduino getting started guide is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the guide are released into the public domain.
Suggested changes
The content on docs.arduino.cc is facilitated through a public GitHub repository. You can read more on how to contribute in the contribution policy.
License
The Arduino documentation is licensed under the Creative Commons Attribution-Share Alike 4.0 license.
Download latest version of verified & working Windows 10 driver for CH340, CH340G USB to Serial converter. Tested with Arduino, ESP2866, Wemos D1 and other boards.
CH340 driver for Windows 10
Driver details
CH340, CH340G & CH341 (USB-SERIAL chip) V3.5 Driver Version = 2019-01-30, 3.5.2019.1
CH340 Windows 10 driver installation
Open Device Manager – right mouse click on USB Serial, then left click Update Driver …
open the directory with downloaded & extracted CH341SER.zip driver
Finished, Close
CH340 driver installed and working
CH340G converter connection and pinout for programming
»  Arduino Uno
Use the links on this page to download the latest version of Arduino Uno drivers. All drivers available for download have been scanned by antivirus program. Please choose the relevant version according to your computer’s operating system and click the download button.
System Information
Your machine is currently running: Windows (Detect)
Install the driver
Installing drivers for the Seeeduino with window7
-
- Plug in your board and wait for Windows to begin its driver installation process. After a few moments, the process will fail.
- Open the Device Manager by right clicking “My computer” and selecting control panel.
- Look under Ports (COM & LPT). You should see an open port named “USB Serial Port” Right click on the “USB Serial Port” and choose the “Update Driver Software” option.
-
- Next, choose the “Browse my computer for Driver software” option.
-
- Finally, select the driver file named “FTDI USB Drivers”, located in the “Drivers” folder of the Arduino Software download.
Note: the FTDI USB Drivers are from Arduino. But when you install drivers for other Controllers, such as Xadow Main Board, Seeeduino Clio, Seeeduino Lite,
you need to download corresponding driver file and save it. And select the driver file you have downloaded.
-
- The below dialog boxes automatically appears if you have installed driver successfully.
-
- You can check that the drivers have been installed by opening the Windows Device Manager. Look for a “USB Serial Port” in the Ports section.
-
- You can also see the serial port in Arduino environment.
Installing drivers for the Seeeduino with window8
You should save these files which you are editing before installing driver with window8,because there will several power off during operating.
-
- Press “Windows Key” +”R”
- Enter shutdown.exe /r /o /f /t 00
- Click the “OK” button.
- System will restart to a “Choose an option” screen
- Select “Troubleshoot” from “Choose an option” screen
- Select “Advanced options” from “Troubleshoot” screen
- Select “Windows Startup Settings” from “Advanced options” screen
- Click “Restart” button
- System will restart to “Advanced Boot Options” screen
- Select “Disable Driver Signature Enforcement”
- Once the system starts, you can install the Arduino drivers as same as Windows
Installing drivers for the Seeeduino with Mac OS
-
- Download Driver for the Mac OS X version, named 2.2.18 (32bit)
-
- Open the driver file which you just download, and double click FTDIUSBSerialDriver_10_4_10_5_10_6_10_7.mpkg
-
- After double click, you will see an installer window.
-
- You can see the below dialog boxes if you have installed driver successfully.
Copyright (c) 2008-2016 Seeed Development Limited (
www.seeedstudio.comwww.seeed.cc
This static html page was created from http://www.seeedstudio.com/wiki
Arduino IDE 1 Installation (Windows)
Install the Arduino Software (IDE) on Windows
This document explains how to install the Arduino Software (IDE) on Windows machines.
Một số lỗi khi nạp trên Arduino
Chưa chọn đúng Board
Trong trường hợp bạn đang sử dụng Arduino Uno R3 để triển khai cho dự án của mình nhưng lại chọn sai bo arduino khi nạp.
Chọn sai cổng COM
Trong quá trình làm việc bạn có thể cắm rất nhiều thiết bị giao tiếp với máy tính nên thường xuất hiện nhiều cổng COM làm bạn bối rối và chọn sai.
Chọn sai Processor trên Board Arduino Nano
Đa phần các bạn đều sử dụng các bo mạch arduino được sản xuất tại trung nên cần chọn đúng bootloader của hãng sản xuất.
Lỗi “error compiling for board arduino/genuino uno”
Một lỗi cũng hay thường gặp trên arduino uno r3 là lỗi biên dịch chương trình. Để khắc phục vấn đề này các bạn vào phần Sketch > Include Library > Manage Libraries.
Ở phần này các bạn gõ vào thanh tìm kiếm trên phần mềm arduino “u8glib” kéo xuống phía dưới nhấn INSTALL. Như vậy là đã xong rồi nhé.
Network Testing and Emulation Solutions |
LANforge CT70x attenuators require recently signed Arduino drivers. The automatic driver install process for Windows 10 might automatically install a Microsoft Windows version of the Arduino Mega driver. This is not the driver LANforge expects. These instructions will guide you how through uninstalling an old driver and installing the new driver from the Arduino website.
If you have recently removed a driver, you might need to reboot your Windows system for it to complete the driver installation process. |
For more information see Installing LANforge Server on Windows
Download Arduino and install Arduino driver
Install the driver
Installing drivers for the Seeeduino with window7
-
Plug in your board and wait for Windows to begin its driver installation process. After a few moments, the process will fail.
-
Open the Device Manager by right clicking “My computer” and selecting control panel.
-
Look under Ports (COM & LPT). You should see an open port named “USB Serial Port” Right click on the “USB Serial Port” and choose the “Update Driver Software” option.
- Next, choose the “Browse my computer for Driver software” option.
- Finally, select the driver file named “FTDI USB Drivers”, located in the “Drivers” folder of the Arduino Software download.
Note: the FTDI USB Drivers are from Arduino. But when you install drivers for other Controllers, such as Xadow Main Board, Seeeduino Clio, Seeeduino Lite,you need to download corresponding driver file and save it. And select the driver file you have downloaded.
- The below dialog boxes automatically appears if you have installed driver successfully.
- You can check that the drivers have been installed by opening the Windows Device Manager. Look for a “USB Serial Port” in the Ports section.
- You can also see the serial port in Arduino environment.
Installing drivers for the Seeeduino with window8
You should save these files which you are editing before installing driver with window8,because there will several power off during operating.
-
Press “Windows Key” +”R”
-
Enter shutdown.exe /r /o /f /t 00
-
Click the “OK” button.
-
System will restart to a “Choose an option” screen
-
Select “Troubleshoot” from “Choose an option” screen
-
Select “Advanced options” from “Troubleshoot” screen
-
Select “Windows Startup Settings” from “Advanced options” screen
-
Click “Restart” button
-
System will restart to “Advanced Boot Options” screen
-
Select “Disable Driver Signature Enforcement”
-
Once the system starts, you can install the Arduino drivers as same as Windows
Installing drivers for the Seeeduino with Mac OS
-
Enter page: https://www.ftdichip.com.
-
Download Driver for the Mac OS X version, named 2.2.18 (32bit)
- Open the driver file which you just download, and double click FTDIUSBSerialDriver_10_4_10_5_10_6_10_7.mpkg
- After double click, you will see an installer window.
- Click “Continue”.
- You can see the below dialog boxes if you have installed driver successfully.
- Test it with Seeeduino
add
Manually Install Drivers on Windows
Learn how to install Arduino drivers manually on Windows 7, Vista & 10.
The following instructions are for Windows 7, Vista and 10. They are valid also for Windows XP, with small differences in the dialog windows. In the following instruction only the Leonardo board will be mentioned, but the same procedure is valid for all the Arduino boards.
Plug in your board and wait for Windows to begin its driver installation process. If the installer does not launch automatically, navigate to the Windows Device Manager (Start>Control Panel>Hardware) and find the Arduino Leonardo listing. Right click and choose Update driver.
At the next screen, choose “Browse my computer for driver software”, and click Next.
Click the Browse… button. Another dialog appears: navigate to the folder with the Arduino software that you just downloaded. Select the drivers folder an click OK, then click Next.
You will receive a notification that the board has not passed Windows Logo testing. Click on the button Continue Anyway.
After a few moments, a window will tell you the wizard has finished installing software for Arduino Leonardo. Press the Close button.
The text of the Arduino getting started guide is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the guide are released into the public domain.
Suggested changes
The content on docs.arduino.cc is facilitated through a public GitHub repository. You can read more on how to contribute in the contribution policy.
License
The Arduino documentation is licensed under the Creative Commons Attribution-Share Alike 4.0 license.
Hướng dẫn cài đặt Driver cho Arduino Uno R3 (Mới nhất 2023)
Chào các bạn, hôm nay mình sẽ hướng dẫn các bạn cách cài đặt Driver cho Arduino IDE. Một sự cố mà các bạn hay thực hành trên các bo Arduino. Trong các sự cố mà các bạn thường hay gặp phải là không kết nối được cổng COM làm cho các bạn không thể giao tiếp được với board mạch chủ. Để có thể hiểu rõ hơn cách giao tiếp ra sao các bạn đọc ngay bài viết bên dưới để hiểu rõ hơn nhé.
- Đọc ngay: Giao tiếp Arduino với máy tính thông qua Serial (UART) (Cập nhật 2023)
- Đọc ngay: Mạch Arduino Uno là gì? Hướng dẫn chi tiết cách sử dụng
Arduino Uno Drivers Download
- Driver Version: 1.0.0.0
- Release Date: 2013-01-04
- File Size: 2.14M
- Supported OS: Windows 10 64 bit, Windows 8.1 64bit, Windows 7 64bit, Windows Vista 64bit, Windows XP 64bit
Please enter verification code, then click the download button.
- Driver Version: 1.0.0.0
- Release Date: 2013-01-01
- File Size: 8.49K
- Supported OS: Windows 10 32 & 64bit, Windows 8.1 32 & 64bit, Windows 7 32 & 64bit, Windows Vista 32 & 64bit, Windows XP
Please enter verification code, then click the download button.
Download Arduino and install Arduino driver
Tech Support & Product Discussion
Thank you for choosing our products! We are here to provide you with different support to ensure that your experience with our products is as smooth as possible. We offer several communication channels to cater to different preferences and needs.
Để lập trình được cho các board Arduino, các bạn cần phải có một công cụ gọi là Intergrated Development Environment (IDE). Công cụ này được đội ngũ kĩ sư của Arduino phát triển và có thể chạy trên Windows, MAC OS X và Linux. Ở đây mình sẽ hướng dẫn các bạn cài đặt nó trên Windows. Các bạn cũng làm tương tự các bước này cho các nền tảng khác.
Bước 1: Truy cập địa chỉ http://arduino.cc/en/Main/Software/… . Đây là nơi lưu trữ cũng như cập nhật các bản IDE của Arduino. Bấm vào mục Windows ZIP file for non admin install như hình minh họa.
Bạn sẽ được chuyển đến một trang mời quyền góp tiền để phát triển phần mềm cho Arduino, tiếp tục bấm JUST DOWNLOAD để bắt đầu tải.
Bước 2: Sau khi download xong, các bạn giải nén và chạy file arduino.exe để khởi động Arduino IDE.
Để máy tính của bạn và board Arduino giao tiếp được với nhau, chúng ta cần phải cài đặt driver trước tiên.
Đầu tiên, các bạn chạy file arduino-1.8.4\drivers\dpinst-x86.exe (Windows x86) hoặc arduino-1.8.4\drivers\dpinst-amd64.exe (Windows x64). Cửa sổ “Device Driver Installation Wizard” hiện ra, các bạn chọn Next để tiếp tục.
Khi có yêu cầu xác nhận cài đặt driver, chọn “Install”
Đợi khoảng 10 giây trong lúc quá trình cài đặt diễn ra …
Quá trình cài đặt đã hoàn tất. Bấm “Finish” để thoát.
– Nguồn: Arduino.vn –
Install the Driver
First of all, you need to:
-
Get a Micro-USB cable
- You need a Micro-USB cable first; the data cable of an Android Phone will do fine. If you can’t find one, you can buy one here.
-
Connect the board
- The Seeeduino V4.2 automatically draw power from either the USB connection to the computer or an external power supply. Connect the Arduino board to your computer using the USB cable. The green power LED (labelled PWR) should go on.
For Windows
This drive is available for Windows XP, Windows Vista, Windows 7, Windows 8/8.1 and Windows 10.
- Plug in your board and wait for Windows to begin its driver installation process. After a few moments, the process will fail, despite best efforts.
- Click on the Start Menu, and open up the Control Panel.
- While in the Control Panel, navigate to System and Security. Next, click on System. Once the System window is up, open the Device Manager.
- Look under Ports (COM & LPT). You should find an open port named “Seeeduino v4.2”. If there is no COM & LPT section, look under “Other Devices” for “Unknown Device”.
- Right click on the “Seeeduino v4.2” port and choose the “Update Driver Software” option.
- Next, choose the “Browse my computer for Driver software” option.
- Finally, navigate to and select the driver file named “seeed_usb_serial.inf”
- Windows will finish up the driver installation from there.
For Mac OSX
You don’t need to install any drivers.
For Linux
Keywords searched by users: arduino driver windows 10
Categories: Tìm thấy 97 Arduino Driver Windows 10
See more here: kientrucannam.vn
See more: https://kientrucannam.vn/vn/